Tacoma 2WD L4-2.7L (2TR-FE) (2005)
/Page-1275001.png)
Power Mirror Switch: Testing and Inspection
INSPECT OUTER MIRROR SWITCH ASSEMBLY
a. Check the resistance.
1. Press L on the left/right adjustment switch.
2. Using an ohmmeter, measure the resistance between the terminals.
If the result is not as specified, replace the outer mirror switch.
3. Press R on the left/right adjustment switch.
4. Using an ohmmeter, measure the resistance between the terminals.
If the result is not as specified, replace the outer mirror switch.
