Tacoma 2WD L4-2.7L (2TR-FE) (2005)
66. INSTALL CHAIN TENSIONER SLIPPER
a. Install the tensioner slipper with the bolt.
Torque: 21 Nm (214 kgf-cm, 15 ft. lbs.)
67. INSTALL CHAIN TENSIONER ASSEMBLY NO.1
a. Install a new gasket and the chain tensioner with the bolt and nut.
Torque: 10 Nm (102 kgf-cm, 7 ft. lbs.)
68. INSTALL TIMING CHAIN GUIDE
a. Install a new O-ring and the chain guide with the 2 bolts.
Torque: 10 Nm (102 kgf-cm, 7 ft. lbs.)
70. INSTALL OIL PAN SUB-ASSEMBLY
a. Apply continuous beads of seal packing to the places shown in the illustration.
Seal packing: Part No.08826-00080 or equivalent
Seal width: 2 to 3 mm (0.079 to 0.118 inch)
NOTICE: