Tacoma 2WD L4-2.7L (2TR-FE) (2005)
a. Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.
b. Install the camshaft position sensor with the bolt.
Torque: 8.5 N.m (87 kgf.cm, 75 in.lbf)
NOTE: Make sure that the O-ring is not cracked or jammed when installing.
c. Connect the crankshaft position sensor connector and the 2 wire harness clamps.
8. INSTALL IDLE PULLEY ASSEMBLY W/BRACKET (W/ AIR CONDITIONING)