Tacoma 2WD L4-2.7L (2TR-FE) (2005)
Diagram Legend
Diagram Legend
O:
Indicates values or explains the function for reference during troubleshooting.
P:
Indicates the reference showing the position on the vehicle of the parts in the system circuit.
Example: Part L4 (Light Failure Sensor)
* The letter in the code is from the first letter of the part, and the number indicates its order in parts starting with that letter.
Q:
Indicates the reference showing the position on the vehicle of Relay Block Connectors in the system circuit.
Example: Connector "1" is described and is installed on the left side of the instrument panel.
R:
Indicates the reference showing the position on the vehicle of J/B and Wire Harness in the system circuit.
Example: Connector "3C" connects the Instrument Panel Wire and J/B No.3. It is described and is installed on the instrument panel left side.
S:
Indicates the reference describing the wiring harness and wiring harness connector (the female wiring harness is shown first, followed by the
male wiring harness).
Example: Connector "IE1" connects the floor wire (female) and Instrument panel wire (male). It is described and is installed on the left side
kick panel.
T:
Indicates the reference showing the position of the ground points on the vehicle.
Example: Ground point "BO" is described and is installed on the back panel center.
U:
Indicates the reference showing the position of the splice points on the vehicle.