Tacoma 2WD L4-2.7L (2TR-FE) (2005)
/Page-1123045.png)
2. INSTALL REAR SEAT 3 POINT TYPE BELT ASSEMBLY INNER
a. Install the rear seat belt inner and floor anchor of the rear seat belt outer center with the bolt.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
NOTE:
-
Make sure that the rear seat belt inner and floor anchor of the rear seat belt outer center are oriented in the correct direction when
installing.
-
Be careful not to place the rear seat belt inner (and floor anchor of the rear seat belt outer center) over the convex areas of the floor panel.
Access Cab
