Tacoma 2WD L4-2.7L (2TR-FE) (2005)
Steering Angle Sensor: Service and Repair
STEERING SENSOR (W/ VSC)
REPLACEMENT
1. REMOVE SPIRAL CABLE SUB-ASSEMBLY
2. REMOVE STEERING SENSOR
a. Release 6 claw fittings and remove the steering sensor from the spiral cable.
3. INSTALL STEERING SENSOR
a. Install the steering sensor onto the spiral cable.
NOTICE:
-
Engage the claws securely.
-
Be careful not to damage the claws.
4. INSTALL SPIRAL CABLE SUB-ASSEMBLY