Tacoma 2WD L4-2.7L (2TR-FE) (2005)
b. Install the grommet, a new lock washer and the nut.
Torque: 6.9 Nm (70 kgf-cm, 61 inch lbs.)
c. Install the manual valve lever shaft onto the groove and turn it 2 notches counterclockwise to the neutral position.
d. Align the neutral basic line with the switch groove and tighten the adjusting bolt.
Torque: 13 Nm (130 kgf-cm, 9 ft. lbs.)
e. Bend the tabs of the lock washer.
HINT: Bend at least 2 of the lock washer tabs.
5. CONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 inch lbs.)
7. INSPECT PARK/NEUTRAL POSITION SWITCH ASSY
8. ADJUST PARK/NEUTRAL POSITION SWITCH ASSY
9. ADJUST SHIFT LEVER POSITION
10. INSPECT SHIFT LEVER POSITION