Tacoma 2WD L4-2.7L (2TR-FE) (2005)
2. REMOVE FRONT WIPER ARM HEAD CAP
a. Using a screwdriver wrapped with protective tape, remove the 2 front wiper arm head caps.
3. REMOVE FR WIPER ARM LH
a. Operate the wiper, then stop the windshield wiper motor assembly at the automatic stop position.
b. Remove the nut and front wiper arm LH.
4. REMOVE FR WIPER ARM RH
HINT: Perform the same procedure as above on the opposite side.
5. REMOVE FRONT FENDER TO COWL SIDE SEAL LH
a. Disengage the 2 claws and remove the front fender to cowl side seal LH.
6. REMOVE FRONT FENDER TO COWL SIDE SEAL RH
HINT: Perform the same procedure as above on the opposite side.