Tacoma 2WD V6-3.4L (5VZ-FE) (1995)
(b) Remove the 1 screw, 11 clips and radiator grille.
3. Disconnect upper radiator hose.
4. Disconnect radiator reservoir hose.
5. Disconnect lower radiator hose.
6. Remove No. 2 fan shroud.
7. A/T: Disconnect oil cooler hoses.
8. Remove radiator.
Remove the 4 bolts and radiator.
INSTALLATION
Installation is in the reverse order of removal.
NOTE: Insert the tabs of the radiator support through the radiator service holes.
Torque the 4 bolts and radiator: 12 Nm (8.7 ft. lbs.)