Tacoma 2WD V6-3.4L (5VZ-FE) (1995)
Air Flow Meter/Sensor: Testing and Inspection
1. INSPECT MASS AIR FLOW METER (MAF) METER RESISTANCE
-
Using an ohmmeter, measure the resistance between terminals THA and E2.
-
If the resistance is not as specified, replace the MAF meter.
2. INSPECT MAF METER OPERATION
-
Connect the MAF meter connector.
-
Using a voltmeter, connect the positive (+) tester probe to terminal VG, and negative (-) tester probe to terminal E3.
-
Blow air into the MAF meter, and check that the voltage fluctuates.
-
If operation is not as specified, replace the MAF meter.
-
Disconnect the MAF meter connector.