Tacoma 2WD V6-3.4L (5VZ-FE) (1995)
Main Relay (Computer/Fuel System): Testing and Inspection
1. REMOVE EFI MAIN RELAY.
2. INSPECT EFI MAIN RELAY.
-
Inspect relay continuity.
-
Using an ohmmeter, check that there is continuity between terminals 1 and 2.
-
Check that there is no continuity between terminals 3 and 5.
-
If continuity is not as specified, replace the relay.
-
Inspect relay operation.
-
Apply battery positive voltage across terminals 1 and 2.
-
Using an ohmmeter, check that there is continuity between terminals 3 and 5.
-
If operation is not as specified, replace the relay.
3. REINSTALL EFI MAIN RELAY.