Tacoma 2WD V6-3.4L (5VZ-FE) (1995)
Clutch Pedal Assembly: Adjustments
Fig. 1 Clutch Pedal Adjustments. Pickup & 4Runner
1.
Check clutch pedal height, Fig. 1. Clutch pedal height should be 6.2 inch If height is not as specified, loosen locknut, then rotate adjusting bolt
until specified height is obtained. Tighten locknut.
2.
Check clutch pedal freeplay, Fig. 1. Depress clutch pedal until resistance is felt, then measure freeplay distance. Freeplay should be .20-.59 inch.
3.
Check clutch cylinder pushrod play at top of pedal. Play should be .039-.197 inch.
4.
If clutch pedal freeplay is not as specified, loosen locknut, then rotate pushrod adjusting screw until specified freeplay is obtained.
5.
Tighten locknut, then recheck pedal height.