Tacoma 2WD V6-3.4L (5VZ-FE) (1995)
b. Using a dial indicator, measure the differential case runout.
Maximum case runout: 0.04 mm (0.0016 inch)
c. Remove the differential case.
10. Remove side bearings. Using SST 09950-40010 (09951-04010, 09952-04010, 09953-04020, 09954-04010, 09955-04060, 09957-04010,
09958-04010), 09950-60010 (09951-00480), remove the side bearings from the differential case.
HINT: Fix the claws of SST to the notch in the differential case.
11. Disassemble differential case assembly.
a. Using a pin punch and a hammer, remove the straight pin.
b. Remove these parts from the differential case:
^
Pinion shaft
^
2 pinion gears
^
2 pinion gear thrust washers
^
2 side gears
^
2 side gear thrust washers