Tacoma 2WD V6-3.4L (5VZ-FE) (1995)
5. INSTALL BEARING SPACER, FRONT BEARING AND OIL SLINGER
a. Install a new bearing spacer and place the front bearing and oil slinger.
b. Using SST and the companion flange, install the front bearing, then remove the companion flange.
SST 09950-30010 (09951-03010, 09953-03010, 0995-03010, 0995-03030, 0995-03020)
6. INSTALL OIL SEAL
a. Coat a new oil seal lip with MP grease.
b. Using SST and a hammer, install the oil seal.
SST 09554-30011
Oil seal drive in depth:
1.0 mm (0.039 in.)
7. INSTALL COMPANION FLANGE
a. Place the companion flange on the drive pinion.
b. Coat the threads of a new nut with gear oil.
c. Using SST to hold the flange, torque the nut.
SST 0933-00021