Tacoma 2WD V6-3.4L (5VZ-FE) (1995)
/Page-1104005.png)
f.
Measure the hub axial play.
Axial play: 0.05 mm (0.0020 inch) or less.
9. Install lock cap, cotter pin and grease cap.
a. Install the lock cap and a new cotter pin.
b. Install the grease cap.
10. Install brake caliper. Install the 2 brake caliper set bolts.
Torque to 108 Nm (80 ft. lbs.)
11. w/ ABS: Connect ABS speed sensor and wire harness clamp to steering knuckle.
Torque to 8.0 Nm (71 inch lbs.).
12. Install front wheel.
Torque to 110 Nm (83 ft. lbs.)
13. Check front wheel alignment.
14. w/ ABS: Check ABS speed sensor signal.
