Tacoma 2WD V6-4.0L (1GR-FE) (2006)
/Page-1327025.png)
CAUTION:
-
Never dispose of a front seat outer belt assembly that has an inactivated pretensioner.
-
The seat belt pretensioner produces a loud, exploding sound when it activates. Perform the operation where it will not be a nuisance to persons
nearby.
-
When activating a front sear outer belt (with seat belt pretensioner), stand at least 10 m (33 ft) away from the front seat outer belt.
-
Use gloves and safety glasses when handling a front seat belt with an activated pretensioner.
-
Always wash your hands with water after completing activation.
-
Do not apply water to a front seat outer belt that has an activated pretensioner.
-
When activating the seat belt pretensioner, always use the specified SST (SRS air bag deployment tool).
-
Perform operation in a place away from electrical interference.
1. DISPOSE OF FRONT SEAT OUTER BELT ASSEMBLY
(When Installed in Vehicle)
HINT: Prepare a battery to power activation of the seat belt pretensioner.
a. Check whether SST is functioning.
SST 09082-00700, 09082-00770
CAUTION: When activating the seat belt pretensioner, always use the specified SST.
1. Connect SST red clip to the battery positive (+) terminal and the black clip to the battery negative (-) terminal.
HINT: Do not connect the yellow connector. The yellow connector is used to connect to the seat belt pretensioner.