Tacoma 2WD V6-4.0L (1GR-FE) (2006)
8. Confirm that the sensitivity is within the standard range.
Standard range: 27 to 33 kg (59.52 to 72.75 lb)
HINT:
-
When performing the sensitivity check, use a solid metal weight (the check result may not be accurate if a liquid weight is used).
-
If the sensitivity deviates from the standard range, retighten the bolts of the front passenger seat taking care not to deform the seat rail.
After performing this procedure, if the sensitivity is not within the standard range, replace the front seat assembly RH.
-
If the zero point calibration has not finished normally, replace the front seat assembly RH.