Tacoma 4WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1996)
/Page-379001.png)
Drive Belt: Service and Repair
DRIVE BELT REMOVAL
1. REMOVE PS PUMP DRIVE BELT
2. REMOVE ENGINE UNDER COVER
3. LOOSEN IDLE PULLEY LOCK NUT
Torque: 39 N.m (400 kg.cm, 29 ft.lb)
4. LOOSEN AND REMOVE COMPRESSOR DRIVE BELT
DRIVE BELT INSTALLATION
Installation is in the reverse order of removal.
