Tacoma 4WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1996)
Timing Chain Tensioner: Testing and Inspection
1. Inspect chain tensioner slipper and vibration dampers.
Measure the chain tensioner slipper and vibration damper wears.
Maximum wear: 1.0 mm (0.039 inch)
If the wear is greater than maximum, replace the slipper and/or dampers.
2. Inspect No. 1 chain tensioner.
3. Inspect No. 2 chain tensioner.
(a)
Inspect chain tensioner.
-
Check that the plunger moves smoothly when the ratchet pawl is raised with your finger.
-
Release the ratchet pawl and check that the plunger is locked in place by the ratchet pawl and does not move when pushed with your
finger.