Tacoma 4WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1996)
/Page-1694001.png)
Headlamp Switch: Service and Repair
Removal/Installation
1.
Obtain audio anti-theft code, if equipped, as outlined in Technician Safety Information.
2.
Disconnect battery ground cable.
3.
Remove steering wheel as outlined under Steering Wheel, Service and Repair.
4.
Remove steering column upper and lower covers.
5.
Disconnect switch connectors, remove screws and combination switch.
6.
Reverse procedure to install. Reset audio coded anti-theft system, if equipped, as outlined under Technician Safety Information.
