Tacoma 4WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1996)
-
Align the protrusion of the distributor housing with the groove on the driven gear.
-
Apply a light coat of engine oil on the O-ring.
-
Install the distributor with 2 bolts.
Torque: 19 Nm (14 ft lb)
3. INSTALL DISTRIBUTOR CAP.
4. RECONNECT HIGH-TENSION CORDS TO DISTRIBUTOR CAP.
5. CONNECT DISTRIBUTOR CONNECTOR.
6. CHECK IGNITION TIMING.