Tacoma 4WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1996)
/Page-804001.png)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
1. DRAIN ENGINE COOLANT.
2. REMOVE ECT SENSOR.
-
Disconnect the engine wire protector from the 3 brackets.
-
Disconnect the ECT sensor connector.
-
Using a 19 mm deep socket wrench, remove the ECT sensor and gasket.
HINT: Installation is in the reverse order of removal.
