Tacoma 4WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1996)
-
If the resistance is not as specified, replace the ECT sensor.
4. REINSTALL ECT SENSOR.
-
Using a 19 mm deep socket wrench, install the ECT sensor and gasket.
Torque: 20 N.m (200 kgf.cm, 14 ft.lbf)
-
Connect the ECT sensor connector.
-
Install the engine wire protector to the 3 brackets.
5. REFILL ENGINE COOLANT.