Tacoma 4WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1996)
/Page-680001.png)
Distributor: Service and Repair
Removal/Installation
COMPONENTS FOR REMOVAL AND INSTALLATION
REMOVAL
1. DISCONNECT DISTRIBUTOR CONNECTOR.
2. DISCONNECT HIGH-TENSION CORDS FROM DISTRIBUTOR CAP.
3. SET NO.1 CYLINDER TO TDC/COMPRESSION.
-
Turn the crankshaft pulley clockwise until the timing mark is aligned with "0" mark on the oil pump cover.
-
Remove the 3 bolts and distributor cap.
