Tacoma 4WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1996)
8. INSPECT SIGNAL GENERATOR (PICKUP COIL) RESISTANCE.
-
Using an ohmmeter, measure the resistance between the terminals.
Pickup coil resistance:
Cold G (+) and G (-): 185 - 275 Ohms
Hot G (+) and G (-): 240 - 325 Ohms
-
If the resistance is not as specified, replace the distributor housing assembly.
9. REINSTALL IGNITION COIL DUST COVER.
10. REINSTALL ROTOR.
11. REINSTALL DISTRIBUTOR CAP.
12. RECONNECT DISTRIBUTOR CONNECTOR.