Tacoma 4WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1996)
/Page-676002.png)
Maximum Resistance: 25 k Ohms per cord
-
If resistance is greater than the maximum, check the terminals.
-
If necessary, replace the high-tension cord.
6. RECONNECT HIGH-TENSION CORDS TO DISTRIBUTOR CAP.
-
Assemble the holder and grommet.
NOTICE: Check that the holder is correctly installed to the grommet and distributor cap as shown in the illustration.
-
Check that the lock claw of the holder is engaged by lightly pulling the holder.
7. RECONNECT HIGH-TENSION CORDS TO SPARK PLUGS.
-
Secure the high-tension cords with the clamps as shown in the illustration.
8. REINSTALL INTAKE AIR CONNECTOR.
9. REINSTALL AIR CLEANER CAP AND MAF METER ASSEMBLY.
