Tacoma 4WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1996)
/Page-131001.png)
Mass Air Flow Meter: Testing and Inspection
INSPECT MAF METER OPERATION.
-
Connect the negative (-) terminal cable to the battery.
-
Turn the ignition switch ON.
-
Connect the MAF meter connector.
-
Using a voltmeter, connect the positive (+) tester probe to terminal VG, and negative (-) tester probe to terminal E3.
-
Blow air into the MAF meter. and check that the voltage fluctuates.
-
If operation is not as specified, replace the MAF meter.
