Tacoma 4WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1996)
/Page-1354001.png)
Ignition Lock: Service and Repair
Fig. 6 Ignition Lock Removal
1.
Obtain audio anti-theft code, if equipped, as outlined in Technician Safety Information.
2.
Disconnect battery ground cable.
3.
Turn ignition switch to ACC position.
4.
Remove steering column covers.
5.
Insert a small diameter rod into hole located on side of lock cylinder, then while holding down pin, remove lock cylinder, Fig.11.
6.
Reverse procedure to install. Ensure lock cylinder is in ACC position. Reset audio coded anti-theft system, if equipped, as outlined under
Technician Safety Information.
