Tacoma 4WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1996)
a. Using a screwdriver and hammer, unstake the washer.
NOTICE: Avoid any impact to the steering rack.
b. Using a spanner to hold the steering rack steady, and using SST 09922-10010, remove the rack end.
NOTICE: Use SST 09922-10010 in the direction shown in the illustration. Mark the RH and LH rack ends.
5. Remove rack housing no. 2 bracket and grommet.
a. Place matchmarks on the bracket and rack housing.
b. Remove the bolt.
6. Remove rack guide spring cap lock nut. Using SST 09922-10010, remove the nut.
NOTICE: Use SST 09922-10010 in the direction shown in the illustration.
7. Remove rack guide spring cap, rack guide, spring, rack guide and rack guide seat.
a. Using SST 09631-10021, remove the cap.
b. Remove the seat from the guide.
8. Remove dust cover.