Tacoma 4WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1996)
/Page-1423001.png)
Ball Joint: Testing and Inspection
Upper
Front Lower Ball Joint / 4WD
REMOVAL
1. Remove front wheel.
Installation Hint: Torque to 110 Nm (83 ft. lbs.)
2. Disconnect tie rod end.
a. Loosen the 4 bolts.
Removal Hint: Do not remove the bolts.
Installation Hint: Torque to 113 Nm (83 ft. lbs.)
b. Remove the cotter pin and nut from the tie rod end.
Installation Hint: Torque to 90 Nm (67 ft. lbs.)
