Tacoma 4WD L4-164.4 2693cc 2.7L DOHC (3RZ-FE) (1996)
^
Use SST 09649-17010, 09316- 12010 on 3RZ-FE and 5VZ-FE engines w/o Diff. Lock:
Oil seal drive in depth: 0.5 mm (0.020 inch)
HINT: Connect SST with vinyl tape.
^
Use SST 09214 - 76011 on 3RZ-FE and 5VZ-FE engines w/Diff. Lock:
Oil seal drive in depth: 1.0 mm (0.039 inch)
13. install companion flange.
a. Place the companion flange on the drive pinion.
b. Apply light coat of hypoid gear oil on threads of a new companion flange nut.
c. Using SST 09330 - 00021 to hold the flange, torque the nut.
On 2RZ-FE engines torque to 108 Nm (80 ft. lbs.)
On 3RZ-FE and 5VZ-FE engines w/o Diff. Lock torque to 147 Nm (109 ft. lbs.)
On 3RZ-FE and 5VZ-FE w/Diff. Lock torque to 196 Nm (145 ft. lbs.)
14. Adjust drive pinion preload.
15. Stake drive pinion nut.
16. Connect rear propeller shaft.