toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Drivetrain - Driveline Engagement Noise|Page 4104 > < Drivetrain - Cyclical Body or Driveline Vibration|Page 4099
Page 1
background image

Drive/Propeller Shaft: All Technical Service Bulletins
Drivetrain - Driveline Engagement Noise

Ref.: DRIVELINE/DIFFERENTIAL

No.: DL001-96

Date: AUGUST 30, 1996

Model: TAC

Title: DRIVELINE ENGAGEMENT NOISE - TACOMA (4WD)

To minimize driveline engagement noise when shifting into "D" or "R" position on 4WD automatic transmission models, the following changes have
been made.

1.

Washers were added to the Rear Transfer Output Shaft, between the speedometer drive gear and companion flange. The rear companion flange
was also revised to accommodate added Washers.

Changes effective - VIN 4TA******TZO86OOO (P/D 9508)

2.

Washers were added to the Intermediate Shaft between the center bearing and flange.

Change effective - VIN 4TA******TZ103100 (P/D 9510)

Drivetrain - Driveline Engagement Noise|Page 4104 > < Drivetrain - Cyclical Body or Driveline Vibration|Page 4099