Tacoma 4WD L4-2.7L (2TR-FE) (2005)
Front Bumper Cover / Fascia: Service and Repair
REPLACEMENT
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE RADIATOR GRILLE
a. Remove the 2 screws.
b. Using a clip remover, remove the 2 clips.
c. Disengage the 2 clips and remove the radiator grille.
3. REMOVE FRONT BUMPER COVER
a. Apply protective tape to the outer circumference of the front bumper cover, as shown in the illustration.
b. Remove the 6 screws.
c. Using a clip remover, remove the 7 clips.
d. Remove the 2 clips.