Tacoma 4WD L4-2.7L (3RZ-FE) (2004)
/Page-733001.png)
Clutch Slave Cylinder: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. PULL OUT BOOT WITH PUSH ROD
2. REMOVE PISTON
Using compressed air, remove the piston with the spring from the cylinder.
REASSEMBLY
1. COAT PISTON WITH LITHIUM SOAP BASE GLYCOL GREASE, AS SHOWN
2. INSTALL PISTON WITH SPRING INTO CYLINDER
3. INSTALL BOOT WITH PUSH ROD TO CYLINDER
