Tacoma 4WD L4-2.7L (3RZ-FE) (2004)
Install a new dam with the double - stick tape as shown in the illustration.
NOTE: Do not touch the glass face after cleaning it.
4. POSITION GLASS
a. Place the glass in the correct position.
b. Check that all contacting parts of the glass rim are perfectly even and do not make contact with the spacers.
c. Place reference marks between the glass and body.
d. Remove the glass.
5. CLEAN CONTACT SURFACE OF GLASS
Using a cleaner, clean the contact surface which is black-colored area around the entire glass rim.
NOTE: Do not touch the glass face after cleaning it.
6. COAT CONTACT SURFACE OF BODY WITH PRIMER "M"
Using a brush, coat Primer M to the exposed part of body on the vehicle side.
NOTE:
-
Let the primer coating dry for 3 minutes or more.
-
Do not coat Primer M to the adhesive.
-
Do not keep any of the opened Primer M for later use.
7. COAT CONTACT SURFACE OF GLASS WITH PRIMER "G"