Tacoma 4WD V6-3.4L (5VZ-FE) (1995)
12. Remove drive pinion front bearing. Using SST 09950-00020 and a press, remove the bearing and washer from the drive pinion.
HINT: If the drive pinion or ring gear are damaged replace them as a set.
13. Remove drive pinion bearing outer races.
a. Using a brass bar and a hammer, remove the front bearing outer race.
b. Using SST 09502-12010, 09612-65014 (09612-01020, 09612-01050), remove the rear bearing outer race.
14. Remove side bearing outer races.
HINT:
^
Measure the plate washer and note the thickness.
^
Tag the bearing outer races to show the location for reassembly.
a. Using SST 09950-60010 (09951-00540), 09550-70010 (09951-01500) and a press, remove the plate washer and outer race from the bearing
retainer.