Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-1460001.png)
Keyless Entry Receiver: Testing and Inspection
INSPECT DOOR CONTROL RECEIVER
a. Disconnect the D7 door control receiver connector.
b. Measure the voltage and resistance of the wire harness side connector.
If the result is not as specified, there may be a malfunction on the wire harness side.
c. Reconnect the door control receiver connector.
d. Measure the voltage of the connector.
If the result is not as specified, there may be a malfunction on the receiver.
