Tacoma 4WD V6-4.0L (1GR-FE) (2006)
Remote Switch: Service and Repair
STEERING PAD SWITCH
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
2. REMOVE NO. 2 LOWER STEERING WHEEL COVER
3. REMOVE NO. 3 LOWER STEERING WHEEL COVER
4. REMOVE HORN BUTTON ASSEMBLY
5. REMOVE STEERING PAD SWITCH LH
a. Disconnect the connector.
b. Remove the screw.
c. Disengage the 2 pins and remove the steering pad switch LH.
d. Release the tab of the steering pad switch cable from the steering pad switch LH as shown in the illustration.