Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-1497001.png)
Trailer Connector: Service and Repair
Trailer Socket
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE TRAILER SOCKET
a. Disconnect the 4 connectors and disengage the 2 clamps.
b. Remove the 2 bolts, then remove the No. 3 wire frame.
c. Remove the 2 bolts, then remove the wiring harness clamp bracket.
INSTALLATION
1. INSTALL TRAILER SOCKET
a. Install the 2 bolts and wiring harness clamp bracket.
Torque: 8.3 N.m (85 kgf.cm, 73 in.lbf)
