toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Body - Wind Noise Between Front and Rear Doors|Page 7855 > < Body - Wind Noise Between Front and Rear Doors|Page 7853
Page 5
background image

A.

Driver side: Connect the power window regulator master switch.

Passenger side: Connect the power window regulator switch.

B.

Move the front door glass sub-assembly LH until the 2 bolts appear in the service holes.

C.

Remove the 2 bolts.

^

Be careful when removing the 2 bolts as the glass may fall and be damaged.

^

Be careful NOT to damage the glass.

D.

Remove the front door glass sub-assembly LH in the direction indicated by the arrow marks in the illustration.

E.

Driver side: Disconnect the power window regulator master switch.

Passenger side: Disconnect the power window regulator switch.

Access Panel Rear Weatherstrip and Rear Door Weatherstrip:

1.

Remove the access panel rear weatherstrip.

Refer to TIS:

^

2005 model year Tacoma Repair Manual, Vehicle Exterior - Door/Hatch - "Access Door: Disassembly".

^

2006 or 2007 model year Tacoma Repair Manual, Vehicle Exterior - Door/Hatch - "Engine Hood Door: Access Door (for Access Cab):
Disassembly".

Body - Wind Noise Between Front and Rear Doors|Page 7855 > < Body - Wind Noise Between Front and Rear Doors|Page 7853