Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-1563007.png)
a. Using a screwdriver with its tip taped in protective tape, disengage the 2 claws and remove the room light lens.
b. Using a screwdriver with its tip taped in protective tape, disengage the 2 claws.
c. Disconnect the room light connector and remove the room light.
48. REMOVE ROOF CONSOLE BOX ASSEMBLY
a. Remove the screw.
b. Disengage the 2 clips and 3 claws.
c. Disconnect the accessory meter connector and map lamp connector, and remove the roof console box.
d. Using a clip remover, remove the wire harness clamp.
