Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-1565006.png)
39. REMOVE QUARTER INSIDE TRIM BOARD RH
HINT: Follow the same procedures as for the quarter trim board LH.
40. REMOVE ROOM LIGHT ASSEMBLY
a. Using a screwdriver with its tip taped in protective tape, disengage the 2 claws and remove the room light lens.
b. Using a screwdriver with its tip taped in protective tape, disengage the 3 claws.
c. Disconnect the room light connector and remove the room light.
41. REMOVE VISOR ASSEMBLY LH
a. Remove the 2 screws.
b. Remove the visor from the visor holder.
42. REMOVE VISOR ASSEMBLY RH
HINT: Follow the same procedures as for the visor assembly LH.
