Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-1606001.png)
Mud Flap: Service and Repair
FENDER PANEL MUDGUARD
REMOVAL
1. REMOVE FRONT FENDER MUDGUARD
a. Using a clip remover, remove the 3 clips.
b. Remove the 3 screws and front fender mudguard.
2. REMOVE REAR QUARTER PANEL MUDGUARD
a. for 2WD:
1. Remove the 3 screws and rear quarter panel mudguard.
b. for 4WD and Pre Runner:
1. Using a clip remover, remove the 3 clips.
2. Remove the 3 screws and rear quarter panel mudguard.
INSTALLATION
1. INSTALL REAR QUARTER PANEL MUDGUARD
