toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Body - Wind Noise Between Front and Rear Doors|Page 8533 > < Body - Wind Noise Between Front and Rear Doors|Page 8531
Page 9
background image

6.

Install the front door inside panel plate LH with the 4 screws.

7.

Install the front door trim panel.

Access Panel Rear Weatherstrip and Rear Door Weatherstrip:

1.

Install the NEW rear door weatherstrip LH (P/N 67871-04021 RH & 67872-04021 LH).

Refer to TIS:

^

2005 model year Tacoma Repair Manual, Vehicle Exterior - Door/Hatch - "Access Door: Reassembly".

^

2006 or 2007 model year Tacoma Repair Manual, Vehicle Exterior - Door/Hatch - "Engine Hood/Door: Access Door (for Access Cab):
Reassembly".

A.

Engage the 20 clips and install a NEW rear door Weatherstrip LH.

B.

Engage the 3 clips.

C.

Remove the red tab tape at both ends to expose the double-sided tape attached to the weatherstrip, and attach the weatherstrip to the door
panel.

Body - Wind Noise Between Front and Rear Doors|Page 8533 > < Body - Wind Noise Between Front and Rear Doors|Page 8531