Tacoma 4WD V6-4.0L (1GR-FE) (2006)
A.
Driver side: Connect the power window regulator master switch.
Passenger side: Connect the power window regulator switch.
B.
Move the front door glass sub-assembly LH until the 2 bolts appear in the service holes.
C.
Remove the 2 bolts.
^
Be careful when removing the 2 bolts as the glass may fall and be damaged.
^
Be careful NOT to damage the glass.
D.
Remove the front door glass sub-assembly LH in the direction indicated by the arrow marks in the illustration.
E.
Driver side: Disconnect the power window regulator master switch.
Passenger side: Disconnect the power window regulator switch.
Access Panel Rear Weatherstrip and Rear Door Weatherstrip:
1.
Remove the access panel rear weatherstrip.
Refer to TIS:
^
2005 model year Tacoma Repair Manual, Vehicle Exterior - Door/Hatch - "Access Door: Disassembly".
^
2006 or 2007 model year Tacoma Repair Manual, Vehicle Exterior - Door/Hatch - "Engine Hood Door: Access Door (for Access Cab):
Disassembly".