Tacoma 4WD V6-4.0L (1GR-FE) (2006)
Brake Bleeding: Service and Repair
W/o VSC
BRAKE FLUID (w/o VSC) BLEEDING
HINT: If any work is done on the brake system or if air in the brake lines is suspected, bleed the air from the system.
NOTICE: Immediately wash off any brake fluid that comes into contact with any painted surfaces.
1. FILL RESERVOIR WITH BRAKE FLUID
Fluid: SAE J1 703 or FMVSS NO. 116 DOT3
2. BLEED MASTER CYLINDER
HINT: If the master cylinder has been disassembled or if the reservoir becomes empty, bleed the air from the master cylinder.
a. Using SST disconnect the brake lines from the master cylinder.
SST 09023-00101
b. Slowly depress the brake pedal and hold it there (step A).
c. Block the outer holes with your fingers, and release the brake pedal (step B).
d. Repeat step A and B 3 or 4 times.