Tacoma 4WD V6-4.0L (1GR-FE) (2006)
b. Using a pin punch and hammer, remove the pin from the master cylinder reservoir.
c. Pull out the master cylinder reservoir.
d. Remove the 3 grommets.
e. Remove the cap.
3. REMOVE BRAKE ACTUATOR HOSE
a. Using needle-nose pliers, slide the 2 clips.
b. Remove the brake actuator hose.
4. REMOVE BRAKE ACTUATOR TUBE NO. 1
a. Using SST, remove the brake actuator tube No. 1.
SST 09023-00101
5. REMOVE BRAKE BOOSTER WITH ACCUMULATOR PUMP ASSEMBLY
a. Using a screwdriver, remove the 2 plugs.
b. Remove the 2 screws and pull the wire harness.