Tacoma 4WD V6-4.0L (1GR-FE) (2006)
2. REMOVE PARKING BRAKE CABLE ASSEMBLY NO. 1
a. Disengage the claw A.
b. Remove the lock nut B, adjusting nut C, clip D and parking brake cable assembly No. 1.
3. REMOVE PARKING BRAKE PEDAL
a. Release the parking brake pedal.
b. Disconnect the parking brake switch connector.
c. Remove the 3 nuts and parking brake control pedal assembly.
4. REMOVE PARKING BRAKE SWITCH ASSEMBLY
a. Remove the screw and parking brake switch assembly.
5. REMOVE PARKING PEDAL PAD
INSTALLATION
1. INSTALL PARKING PEDAL PAD
2. INSTALL PARKING BRAKE SWITCH ASSEMBLY
a. Install the parking brake switch assembly with the screw.