Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-1057005.png)
d. Remove the 4 nuts and pull out the hydraulic brake booster.
e. Remove the brake booster gasket.
DISASSEMBLY
1. REMOVE BRAKE ACTUATOR BRACKET NO. 1
a. Using a hexagon wrench (5 mm), remove the screw and brake actuator bracket No. 1.
b. Using a screwdriver, remove the fluid level warning switch connector.
2. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
a. Remove the screw from the master cylinder reservoir.