Tacoma 4WD V6-4.0L (1GR-FE) (2006)
Wheel Speed Sensor: Service and Repair
Front Speed Sensor
FRONT SPEED SENSOR
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT WHEEL
3. REMOVE FRONT SPEED SENSOR
a. Disconnect the speed sensor connector.
b. Remove the bolt and front speed sensor.
NOTE:
-
Do not attach any foreign matter to the sensor tip.
-
Ensure that no foreign matter enters the sensor installation part.
INSTALLATION
1. INSTALL FRONT SPEED SENSOR